Prof Vassili Toropov

School of Engineering and Materials Science
Queen Mary University of London

v.v.toropov@qmul.ac.uk

www.sems.qmul.ac.uk/staff/v.v.toropov/

Centre for Intelligent Transport

Publications
Grants
Research Group

Publications

Publications of specific relevance to the Centre for Intelligent Transport

2024

Morphing wing design of truss-braced-wing aircraft through aerodynamic shape optimization using the adjoint method
Li L, Zhang Y, Bai J and Toropov V
Engineering Optimization, Taylor and Francis Group, 1-38.

DOI 10.1080/0305215x.2024.2420746

QMRO

12-11-2024

A Feature-Driven Topology Optimization Method Preserving Component Sequence for the 3D Printing of CFRP
Jia D, Zhang Y, Zhu J and Toropov V
AIAA AVIATION FORUM AND ASCEND 2024.

DOI 10.2514/6.2024-4644

27-07-2024

Feature-driven topology optimization method preserving component sequences considering turning angle constraint
Jia D, Liu L, Zhu J, Zhang Y and Toropov V
Acta Mechanica Sinica, Springer Nature vol. 40 (10), 423433-423433.

DOI 10.1007/s10409-024-23433-x

QMRO

03-07-2024

Reduced Order Modelling of a Reynolds Number $10^6$ Jet Flow Using Machine Learning Approaches
Murali AR, Kennedy MLK, Gryazev V, Armani U, Markesteijn A, Naghibi E, Toropov V, Jacob MC, Hinkelmann R and Karabasov SA
30th AIAA/CEAS Aeroacoustics Conference (2024).

DOI 10.2514/6.2024-3257

30-05-2024

A Dynamical System Method for Finding Flow Structures from Jet LES Data
Gryazev V, Riabov V, Markesteijn A, Armani U, Toropov V and Karabasov SA
30th AIAA/CEAS Aeroacoustics Conference (2024).

DOI 10.2514/6.2024-3087

30-05-2024

A mid-range approximation method assisted by trust region strategy for aerodynamic shape optimization
Zhang Y, Jia D, Qu F, Bai J and Toropov V
Applied Mathematical Modelling, Elsevier vol. 132, 607-629.

DOI 10.1016/j.apm.2024.05.005

QMRO

08-05-2024

2023

Influence of Nozzle Geometry on Jet mixing and Jet Installation Noise
Abid HA, Markesteijn AP, Gryazev V, Toropov V, Karabasov SA, Yang G, Allen CB, Kamliya Jawahar H and Azarpeyvand M
AIAA SCITECH 2023 Forum.

DOI 10.2514/6.2023-0615

19-01-2023

Mechanical Properties of Carbon Nanotube Composite Film Under High-Velocity Impact
Wang W, Tan W and Toropov V
ICCM International Conferences on Composite Materials.
01-01-2023

2022

Wing jig shape optimisation with gradient-assisted metamodel building in a trust-region optimisation framework
Zhang Y, Jia D, Bontoft EK and Toropov V
Structural and Multidisciplinary Optimization, Springer Nature vol. 65 (12)

DOI 10.1007/s00158-022-03453-0

QMRO

24-11-2022

Statistical Analysis of High-Speed Jet Flows
Gryazev V, Riabov V, Markesteijn AP, Naghibi E, Armani U, Toropov V and Karabasov SA
AIAA AVIATION 2022 Forum.

DOI 10.2514/6.2022-3977

20-06-2022

Surrogate Model-Based Acoustic Optimisation of Jet Nozzle Exit Geometry
Yang G, Allen CB, Markesteijn AP, Abid HA, Karabasov SA and Toropov VV
AIAA SCITECH 2022 Forum.

DOI 10.2514/6.2022-0683

03-01-2022

AN EFFICIENT SOLUTION FOR AERODYNAMIC SHAPE OPTIMIZATION WITHIN THE MID-RANGE APPROXIMATION FRAMEWORK
Zhang Y, Qu F, Bai J, Jia D, Bontoft EK and Toropov VV
33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022. vol. 1, 201-215.
01-01-2022

APPLICATION OF GENETIC PROGRAMMING AND ARTIFICIAL NEURAL NETWORK APPROACHES FOR RECONSTRUCTION OF TURBULENT JET FLOW FIELDS
Gryazev V, Armani U, Murali AR, Markesteijn AP, Karabasov SA, Toropov V, Elnaz Naghibi S and Riabov V
33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022. vol. 4, 2362-2389.
01-01-2022

2021

Withdrawal: On the use of the data- and physics-driven approaches for jet noise modelling
Gryazev V, Markesteijn AP, Karabasov SA, Toropov V, Armani U, Naghibi E and Riabov V
AIAA AVIATION 2021 FORUM.

DOI 10.2514/6.2021-2247.c1

02-08-2021

On the use of the data- and physics-driven approaches for jet noise modelling
Gryazev V, Markesteijn AP, Karabasov SA, Toropov V, Armani U, Naghibi E and Riabov V
AIAA AVIATION 2021 FORUM.

DOI 10.2514/6.2021-2247

28-07-2021

On the use of the data- and physics-driven approaches for quasi-geostrophic double-gyre problem: application of Genetic Programming
Naghibi E, Karabasov S, Toropov V and Gryazev V
, Copernicus Publications

DOI 10.5194/egusphere-egu21-8093

QMRO

04-03-2021

2020

Adaptive Global Optimization Using Graphics Accelerators
Barkalov K, Lebedev I and Toropov V
In Supercomputing, Springer Nature 150-161.

DOI 10.1007/978-3-030-64616-5_13

01-01-2020

2019

Design Optimization of a Closed Box Wing All-Electric Commuter Aircraft Concept
Siqueira SA, Skinner P, Ibrahem A, Liu MD, Barits SA, Bontoft EK, Vepa R and Toropov V
AIAA Scitech 2019 Forum.

DOI 10.2514/6.2019-0701

06-01-2019

2018

Multi-Disciplinary Design Optimisation of the Cooled Squealer Tip for High Pressure Turbines
Caloni S, Shahpar S and Toropov VV
Aerospace, Mdpi vol. 5 (4)

DOI 10.3390/aerospace5040116

06-11-2018

HPC Implementation of the Multipoint Approximation Method for Large Scale Design Optimization Problems Under Uncertainty
Toropov V, Korolev Y, Barkalov K, Kozinov E and Gergel V
In Engopt 2018 Proceedings of The 6th International Conference on Engineering Optimization, Springer Nature 296-306.

DOI 10.1007/978-3-319-97773-7_27

14-09-2018

Topology Optimization of an Aircraft Wing with an Outboard X-Stabilizer
Raheel M and Toropov V
2018 Multidisciplinary Analysis and Optimization Conference.

DOI 10.2514/6.2018-3885

24-06-2018

Correction: Topology Optimisation of Multi-Element Wingtip Devices
Bontoft EK and Toropov V
2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

DOI 10.2514/6.2018-1390.c1

08-01-2018

Topology Optimisation of Multi-Element Wingtip Devices
Bontoft EK and Toropov V
2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

DOI 10.2514/6.2018-1390

07-01-2018

Parallel Multipoint Approximation Method for Large-Scale Optimization Problems
Gergel VP, Barkalov KA, Kozinov EA and Toropov VV
Communications in Computer and Information Science. vol. 910, 174-185.

DOI 10.1007/978-3-319-99673-8_13

01-01-2018

2017

Multidisciplinary Optimisation of an Automotive Body-in-White Structure Using Crushable Frame Springs and Sub Space Metamodels in Trust-Regions
Mortished C, Ollar J, Benzie P, Jones R, Sienz J and Toropov V
In Advances in Structural and Multidisciplinary Optimization, Springer Nature 1572-1584.

DOI 10.1007/978-3-319-67988-4_118

06-12-2017

Gradient based hyper-parameter optimisation for well conditioned kriging metamodels
Ollar J, Mortished C, Jones R, Sienz J and Toropov V
Structural and Multidisciplinary Optimization vol. 55 (6), 2029-2044.

DOI 10.1007/s00158-016-1626-8

QMRO

01-06-2017

Aerodynamic CFD Based Optimization of Police Car Using Bezier Curves
Taherkhani AR, Gilkeson C, Gaskell P, Hewson R, Toropov V, Rezaienia A and Thompson H
Sae International Journal of Materials and Manufacturing vol. 10 (2)

DOI 10.4271/2017-01-9450

QMRO

16-05-2017

ERRATA: Aerodynamic CFD Based Optimization of Police Car Using Bezier Curves
Taherkhani AR, Gilkeson CA, Gaskell P, Hewson RW, Toropov V, Rezaienia A and Thompson H
Sae International Journal of Materials and Manufacturing, Sae International vol. 11 (2), 161-161.

DOI 10.4271/2017-01-9450.01

11-04-2017

Multi-disciplinary Optimisation of a Compressor Rotor subjected to Ice Impact
Schlaps RC, Toropov VV and Shahpar S
12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017.
03-04-2017

Design Optimization Under Uncertainty Using the Multipoint Approximation Method
Korolev Y, Toropov V and Shahpar S
58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

DOI 10.2514/6.2017-1934

05-01-2017

Sub-space Metamodel-based Multidisciplinary Optimization of an Aircraft Wing subjected to Bird Strike
Ollar J, Jones R and Toropov V
58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

DOI 10.2514/6.2017-1307

05-01-2017

Sub-space approximations for MDO problems with disparate disciplinary variable dependence
Ollar J, Toropov V and Jones R
Structural and Multidisciplinary Optimization vol. 55 (1), 279-288.

DOI 10.1007/s00158-016-1496-0

QMRO

01-01-2017

Optimum Design of Composite Concrete Floors Using a Hybrid Genetic Algorithm
Sahab MG, Toropov VV and Gandomi AH
In Handbook of Neural Computation 581-589.

DOI 10.1016/B978-0-12-811318-9.00031-4

01-01-2017

Design optimization under uncertainty using the multipoint approximation method
Korolev YM, Toropov VV and Shahpar S
58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2017.

DOI 10.2514/6.2017-1934

01-01-2017

Chapter 31 Optimum Design of Composite Concrete Floors Using a Hybrid Genetic Algorithm
Sahab MG, Toropov VV and Gandomi AH
In Handbook of Neural Computation, Elsevier 581-589.

DOI 10.1016/b978-0-12-811318-9.00031-4

01-01-2017

Non-destructive technique for creep prediction in historic masonry structures
Karimian S, Garrity S, Yang D and Toropov V
56th Annual Conference of the British Institute of Non-Destructive Testing, NDT 2017.
01-01-2017

2016

Detailed design of a lattice composite fuselage structure by a mixed optimization method
Liu D, Lohse-Busch H, Toropov V, Hühne C and Armani U
Engineering Optimization vol. 48 (10), 1707-1720.

DOI 10.1080/0305215X.2015.1125262

02-10-2016

A multiscale method for optimising surface topography in elastohydrodynamic lubrication (EHL) using metamodels
de Boer GN, Gao L, Hewson RW, Thompson HM, Raske N and Toropov VV
Structural and Multidisciplinary Optimization vol. 54 (3), 483-497.

DOI 10.1007/s00158-016-1412-7

QMRO

01-09-2016

Topology Optimization of a Blended-Wing-Body Aircraft Structure
Singh G, Toropov V and Eves J
17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference.

DOI 10.2514/6.2016-3364

10-06-2016

Implementation of Discrete Capability into the Enhanced Multipoint Approximation Method for Solving Mixed Integer-Continuous Optimization Problems
Liu D and Toropov V
International Journal For Computational Methods in Engineering Science and Mechanics, Taylor & Francis vol. 17 (1), 22-35.

DOI 10.1080/15502287.2016.1139013

QMRO

02-01-2016

Aircraft Wing Optimization based on Computationally Efficient Gradient-Enhanced Ordinary Kriging Metamodel Building
Mortished C, Ollar J, Toropov V and Sienz J
57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

DOI 10.2514/6.2016-0420

01-01-2016

2015

Application of structural topology optimisation to perforated steel beams
Tsavdaridis KD, Kingman JJ and Toropov VV
Computers & Structures, Elsevier vol. 158, 108-123.

DOI 10.1016/j.compstruc.2015.05.004

QMRO

01-10-2015

The use of glycerol and cooking oil in masonry unit production
Vu HM, Forth JP and Toropov VV
Proceedings of The Institution of Civil Engineers - Construction Materials, Ice Publishing vol. 170 (2), 1-14.

DOI 10.1680/coma.14.00074

11-09-2015

Large-scale CFD Optimization based on the FFD Parametrization using the Multipoint Approximation Method in an HPC Environment
Korolev Y, Toropov V and Shahpar S
16th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference.

DOI 10.2514/6.2015-3234

18-06-2015

Automatic Optimizer vs Human Optimizer for Low-Order Jet Noise Modelling
Korolev Y, Karabasov SA and Toropov V
21st AIAA/CEAS Aeroacoustics Conference.

DOI 10.2514/6.2015-2215

18-06-2015

Weight and mechanical performance optimization of blended composite wing panels using lamination parameters
Liu D, Toropov VV, Barton DC and Querin OM
Structural and Multidisciplinary Optimization, Springer Nature vol. 52 (3), 549-562.

DOI 10.1007/s00158-015-1244-x

QMRO

21-05-2015

Energy thermal management in commercial bread-baking using a multi-objective optimisation framework
Khatir Z, Taherkhani AR, Paton J, Thompson H, Kapur N and Toropov V
Applied Thermal Engineering, Elsevier vol. 80, 141-149.

DOI 10.1016/j.applthermaleng.2015.01.042

01-04-2015

The Multipoint Approximation Method as a Parallel Optimisation Framework for Problems with Computationally Expensive Responses
Korolev YM and Toropov VV
Proceedings of the Fourth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering. vol. 107

DOI 10.4203/ccp.107.3

24-03-2015

Adaptive Sub-Space Approximations in Trust-Regions for Large Scale MDO problems
Ollar J, Toropov V and Jones R
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

DOI 10.2514/6.2015-1585

02-01-2015

Aircraft wing optimisation based on computationally efficient gradient-enhanced kriging
Mortished C, Ollar J, Jones R, Benzie P, Toropov V and Sienz J
57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.
01-01-2015

4 Meta-model based method for thermal comfort and energy use building optimisation at a local resolution
Cowie A, Noakes C, Sleigh A and Toropov V
14th International Conference of IBPSA - Building Simulation 2015, BS 2015, Conference Proceedings., 2325-2332.
01-01-2015

Adaptive sub-space approximations in trust-regions for large scale MDO problems
Ollar J, Toropov V and Jones R
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

DOI 10.2514/6.2015-1585

01-01-2015

Metamodels for Composite Lattice Fuselage Design
Liu D, Zhou X and Toropov V
International Journal of Materials Mechanics and Manufacturing, Ejournal Publishing vol. 4 (3), 175-178.

DOI 10.7763/ijmmm.2016.v4.250

01-01-2015

Applications of Topology Optimization in Structural Engineering : High-Rise Buildings and Steel Components
Kingman JJ, Tsavdaridis KD and Toropov VV
Jordan Journal of Civil Engineering vol. 9 (3), 335-357.
01-01-2015

2014

Dynamic response of typical section using variable-fidelity fluid dynamics and gust-modeling approaches - With correction methods
Berci M, Mascetti S, Incognito A, Gaskell PH and Toropov VV
Journal of Aerospace Engineering vol. 27 (5)

DOI 10.1061/(ASCE)AS.1943-5525.0000336

01-09-2014

Multidisciplinary multifidelity optimisation of a flexible wing aerofoil with reference to a small UAV
Berci M, Toropov VV, Hewson RW and Gaskell PH
Structural and Multidisciplinary Optimization, Springer Nature vol. 50 (4), 683-699.

DOI 10.1007/s00158-014-1066-2

21-05-2014

Dealing with numerical noise in CFD-based design optimization
Gilkeson CA, Toropov VV, Thompson HM, Wilson MCT, Foxley NA and Gaskell PH
Computers and Fluids vol. 94, 84-97.

DOI 10.1016/j.compfluid.2014.02.004

01-05-2014

Rules, precursors and parameterization methodologies for topology optimized structural designs realized through additive manufacturing
Muir MJ, Toropov VV and Querin OM
10th AIAA Multidisciplinary Design Optimization Specialist Conference.
28-02-2014

The use of optimisation for enhancing the development of a novel sustainable masonry unit
Vu HM, Forth JP, Dao DV and Toropov VV
Applied Mathematical Modelling vol. 38 (3), 853-863.

DOI 10.1016/j.apm.2013.07.026

01-02-2014

Metamodeling in multidisciplinary design optimization: How far have we really come?
Viana FAC, Simpson TW, Balabanov V and Toropov V
Aiaa Journal vol. 52 (4), 670-690.

DOI 10.2514/1.J052375

01-01-2014

Stiffness improvement of stamping die by means of topology optimization
Hamasaki H, Nakazono M, Hino R, Yoshida F, Manabe H, Kondo H and Toropov VV
Advanced Materials Research vol. 939, 266-273.

DOI 10.4028/www.scientific.net/AMR.939.266

01-01-2014

Two-scale EHL: Three-dimensional topography in tilted-pad bearings
De Boer GN, Hewson RW, Thompson HM, Gao L and Toropov VV
Tribology International vol. 79, 111-125.

DOI 10.1016/j.triboint.2014.05.019

01-01-2014

Mid-range approximations in sub-spaces for MDO problems with disparate discipline attributes
Ollar J, Toropov V and Jones R
AIAA AVIATION 2014 -15th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference.

DOI 10.2514/6.2014-2437

01-01-2014

2013

Multi-objective aerodynamic shape optimization of small livestock trailers
Gilkeson CA, Toropov VV, Thompson HM, Wilson MCT, Foxley NA and Gaskell PH
Engineering Optimization vol. 45 (11), 1309-1330.

DOI 10.1080/0305215X.2012.737782

01-11-2013

Multi-objective Computational Fluid Dynamics (CFD) design optimisation in commercial bread-baking
Khatir Z, Thompson H, Kapur N, Toropov V and Paton J
Applied Thermal Engineering vol. 60 (1-2), 480-486.

DOI 10.1016/j.applthermaleng.2012.08.011

01-10-2013

A lamination parameter-based strategy for solving an integer-continuous problem arising in composite optimization
Liu D and Toropov VV
Computers and Structures vol. 128, 170-174.

DOI 10.1016/j.compstruc.2013.06.003

23-09-2013

A Review on Traditional and Modern Structural Optimization: Problems and Techniques
Sahab MG, Toropov VV and Gandomi AH
In Metaheuristic Applications in Structures and Infrastructures 25-47.

DOI 10.1016/B978-0-12-398364-0.00002-4

27-08-2013

The use of MDO and advanced manufacturing to demonstrate rapid, agile construction of a mission optimized UAV
Muir M, Muldal C, Kolb E, Robertson G, Parkinson A, Querin OM, Hewson RW and Toropov VV
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.

DOI 10.2514/6.2013-1675

15-08-2013

The use of MDO and advanced manufacturing to demonstrate rapid, agile construction of a mission optimized UAV
Muir M, Muldal C, Kolb E, Robertson G, Parkinson A, Querin OM, Hewson RW and Toropov VV
54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference.

DOI 10.2514/6.2013-1675

02-08-2013

Thermal energy management in the bread baking industry using a system modelling approach
Paton J, Khatir Z, Thompson H, Kapur N and Toropov V
Applied Thermal Engineering vol. 53 (2), 340-347.

DOI 10.1016/j.applthermaleng.2012.03.036

02-05-2013

A semi-analytical model for the combined aeroelastic behaviour and gust response of a flexible aerofoil
Berci M, Gaskell PH, Hewson RW and Toropov VV
Journal of Fluids and Structures vol. 38, 3-21.

DOI 10.1016/j.jfluidstructs.2012.11.004

01-04-2013

Assessment of column removal time for progressive collapse evaluation of high rise structures
Stephen OD, Lam D and Toropov VV
Research and Applications in Structural Engineering, Mechanics and Computation - Proceedings of the 5th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2013., 699-704.

DOI 10.1201/b15963-128

01-01-2013

Optimisation of the energy efficiency of bread-baking ovens using a combined experimental and computational approach
Khatir Z, Paton J, Thompson H, Kapur N and Toropov V
Applied Energy vol. 112, 918-927.

DOI 10.1016/j.apenergy.2013.02.034

01-01-2013

The use of optimisation for enhancing the development of a novel sustainable masonry unit
Vu HM, Forth JP, Dao DV and Toropov VV
Applied Mathematical Modelling

DOI 10.1016/j.apm.2013.07.026

01-01-2013

The use of topology optimisation in the conceptual design of next generation lattice composite aircraft fuselage structures
Niemann S, Kolesnikov B, Lohse-Busch H, Hühne C, Querin OM, Toropov VV and Liu D
Aeronautical Journal vol. 117 (1197), 1139-1154.

DOI 10.1017/S0001924000008745

01-01-2013

Optimal shape design of membrane structures
Lim CW and Toropov VV
Civil-Comp Proceedings. vol. 102
01-01-2013

Meta-model based optimization of building thermal performance incorporating local comfort analysis
Cowie AR, Noakes CJ, Sleigh PA and Toropov VV
Civil-Comp Proceedings. vol. 102
01-01-2013

The application of topology optimisation to the design of steel I-section beam web openings
Kingman JJ, Tsavdaridis KD and Toropov VV
Civil-Comp Proceedings. vol. 102

DOI 10.4203/ccp.102.223

01-01-2013

Parametric optimization of a lattice aircraft fuselage barrel using metamodels built with genetic programming
Lohse-Busch H, Hühne C, Liu D, Toropov VV and Armani U
Civil-Comp Proceedings. vol. 102
01-01-2013

2 A Review on Traditional and Modern Structural Optimization Problems and Techniques
Sahab MG, Toropov VV and Gandomi AH
In Metaheuristic Applications in Structures and Infrastructures, Elsevier 25-47.

DOI 10.1016/b978-0-12-398364-0.00002-4

01-01-2013

2012

Multipoint Approximation Method for design optimization with discrete variables
Liu D and Toropov V
12th AIAA Aviation Technology, Integration and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference.
01-12-2012

Ply number rounding-off in optimization of composite structures using lamination parameters
Liu D and Toropov VV
53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2012.
01-12-2012

Multidisciplinary multifidelity optimisation of a flexible wing aerofoil for small UAV
Berci M, Toropov VV, Hewson RW and Gaskell PH
12th AIAA Aviation Technology, Integration and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference.
01-12-2012

Thermal energy management in the bread baking industry using a system modelling approach
Paton J, Khatir Z, Thompson H, Kapur N and Toropov V
Applied Thermal Engineering

DOI 10.1016/j.applthermaleng.2012.03.036

09-05-2012

Design optimization of supersonic jet pumps using high fidelity flow analysis
Eves J, Toropov VV, Thompson HM, Kapur N, Fan J, Copley D and Mincher A
Structural and Multidisciplinary Optimization vol. 45 (5), 739-745.

DOI 10.1007/s00158-011-0726-8

01-05-2012

Mid-range metamodel assembly building based on linear regression for large scale optimization problems
Polynkin A and Toropov VV
Structural and Multidisciplinary Optimization vol. 45 (4), 515-527.

DOI 10.1007/s00158-011-0692-1

01-04-2012

Development of a numerical optimization approach to ventilation system design to control airborne contaminant dispersion and occupant comfort
Khan MAI, Noakes CJ and Toropov VV
Building Simulation vol. 5 (1), 39-50.

DOI 10.1007/s12273-012-0058-7

01-03-2012

Ply number rounding-off in optimization of composite structures using lamination parameters
Liu D and Toropov VV
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.

DOI 10.2514/6.2012-1522

01-01-2012

Computational fluid dynamics (CFD) investigation of air flow and temperature distribution in a small scale bread-baking oven
Khatir Z, Paton J, Thompson H, Kapur N, Toropov V, Lawes M and Kirk D
Applied Energy vol. 89 (1), 89-96.

DOI 10.1016/j.apenergy.2011.02.002

01-01-2012

Shape optimization of membrane structures based on finite element simulation
Lim CW, Toropov VV and Ye J
Civil-Comp Proceedings. vol. 99
01-01-2012

Derivation of deterministic design data from stochastic analysis in the aircraft design process
Armani U, Coggon S and Toropov VV
Civil-Comp Proceedings. vol. 99
01-01-2012

2011

Optimisation of ventilation system design and operation in hospital wards
Khan MAI, Noakes C and Toropov V
12th International Conference on Indoor Air Quality and Climate 2011. vol. 3, 2111-2112.
01-12-2011

Practical recommendations on the use of moving least squares metamodel building
Loweth EL, De Boer GN and Toropov VV
Proceedings of the 13th International Conference on Civil, Structural and Environmental Engineering Computing.
01-12-2011

Two-stage reliability based design optimization for tension levelling process
Hamasaki H, Gejima K, Toropov V and Yoshida F
Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011., 309-314.
01-12-2011

Multifidelity metamodel building as a route to aeroelastic optimization of flexible wings
Berci M, Gaskell PH, Hewson RW and Toropov VV
Proceedings of The Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science vol. 225 (9), 2115-2137.

DOI 10.1177/0954406211403549

01-09-2011

Computational fluid dynamic analysis and design optimization of jet pumps
Fan J, Eves J, Thompson HM, Toropov VV, Kapur N, Copley D and Mincher A
Computers and Fluids vol. 46 (1), 212-217.

DOI 10.1016/j.compfluid.2010.10.024

01-07-2011

A neuro-fuzzy approach to the weight estimation of aircraft structural components
Hannon C, Querin OM and Toropov VV
Aeronautical Journal vol. 115 (1174), 739-748.

DOI 10.1017/S0001924000006485

01-01-2011

Bilevel optimization of blended composite wing panels
Liu D, Toropov VV, Querin OM and Barton DC
Journal of Aircraft vol. 48 (1), 107-118.

DOI 10.2514/1.C000261

01-01-2011

Control of physical consistency in metamodel building by genetic programming
Armani U, Khatir Z, Khan A, Toropov VV, Polynkin A, Thompson H, Kapur N and Noakes CJ
Civil-Comp Proceedings. vol. 97
01-01-2011

2010

Aeroelastic analysis and gust response of a flexible airfoil
Berci M, Toropov VV, Hewson RW and Gaskell PH
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
16-12-2010

Optimization of blended composite wing panels using smeared stiffness technique and lamination parameters
Liu D, Toropov VV, Zhou M, Barton DC and Querin OM
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
16-12-2010

Design optimization of supersonic jet pumps using high fidelity flow analysis
Eves J, Toropov VV, Thompson HM, Kapur N, Fan J, Copley D and Mincher A
13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2010.

DOI 10.2514/6.2010-9366

01-12-2010

Multidisciplinary optimization of turbomachinary based on metamodel built by genetic programming
Polynkin A, Toropov V and Shahpar S
13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference 2010.

DOI 10.2514/6.2010-9397

01-12-2010

Recognition of design variable inter-dependencies using cross-validated Moving Least-Squares Method
Polynkin A and Toropov V
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.

DOI 10.2514/6.2010-2985

01-01-2010

Optimum stacking sequence design of a blended laminated wing structure using permutation genetic algorithms (permGA)
Liu D, Barton DC, Toropov VV and Querin OM
Civil-Comp Proceedings. vol. 93
01-01-2010

Applications of GA and GP to Industrial Design Optimization and Inverse Problems
Toropov VV, Alvarez LF and Querin OM
In Advances of Soft Computing in Engineering, Springer Nature 133-189.

DOI 10.1007/978-3-211-99768-0_3

01-01-2010

2009

Metamodelling based on high and low fidelity models interaction for uav gust performance optimization
Berci M, Toropov VV, Hewson RW and Gaskell PH
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
01-12-2009

Bi-level optimization of blended composite panels
Liu D, Toropov VV, Osvaldo MQ and David CB
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
01-12-2009

Reliable tension leveling process design using stochastic optimization
Hamasaki H, Shigaki M, Yoshida F and Toropov V
Tetsu-to-Hagane/Journal of The Iron and Steel Institute of Japan vol. 95 (11), 740-746.

DOI 10.2355/tetsutohagane.95.740

01-12-2009

Multiple mid-range and global metamodel building based on linear regression
Polynkin A and Toropov V
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
01-12-2009

Metamodel-based collaborative optimization framework
Zadeh PM, Toropov VV and Wood AS
Structural and Multidisciplinary Optimization vol. 38 (2), 103-115.

DOI 10.1007/s00158-008-0286-8

01-04-2009

NUMERICAL OPTIMIZATION OF SHEET METAL FORMING PROCESS USING NEW FRACTURE CRITERION
HIRAHARA A, HINO R, YOSHIDA F and TOROPOV VV
Engineering Plasticity and Its Applications From Nanoscale to Macroscale., 320-326.

DOI 10.1142/9789814261579_0051

01-04-2009

2008

Numerical optimization of sheet metal forming process using new fracture criterion
Hirahara A, Hino R, Yoshida F and Toropov VV
International Journal of Modern Physics B vol. 22 (31-32), 5692-5698.

DOI 10.1142/s0217979208051029

30-12-2008

An alternative view on weight estimation for the aircraft industry: Problems and MDO solutions
Hannon C, Agyepong L, Toropov VV and Querin OM
12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, MAO.
01-12-2008

Aerodynamic shape optimization of a low drag fairing for small livestock trailers
Gilkeson CA, Toropov VV, Thompson HM, Wilson MCT, Foxley NA and Gaskell PH
12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, MAO.
01-12-2008

Robust design optimization of an automotive knee bolster
Zeguer T, Bales SJ, Patten S, Jones RD and Toropov VV
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
04-07-2008

A new algorithm for reduction of number of press-forming stages in forging processes using numerical optimization and FE simulation
Hino R, Sasaki A, Yoshida F and Toropov VV
International Journal of Mechanical Sciences vol. 50 (5), 974-983.

DOI 10.1016/j.ijmecsci.2007.09.002

01-05-2008

Design and analysis of computer experiments in multidisciplinary design optimization: A review of how far we have come - Or not
Simpson TW, Balabanov V, Toropov V and Viana FAC
12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, MAO.

DOI 10.2514/6.2008-5802

01-01-2008

Adaptive and parallel capabilities in the multipoint approximation method
Polynkin A, Toropov V and Shahpar S
12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, MAO.

DOI 10.2514/6.2008-5803

01-01-2008

2007

Simultaneous model building and validation with uniform designs of experiments
Narayanan A, Toropov VV, Wood AS and Campean IF
Engineering Optimization vol. 39 (5), 497-512.

DOI 10.1080/03052150701399978

01-07-2007

Reduction of Stages in Multi-Stage Metal Forming Process Based on Numerical Optimization in Conjunction with FE Simulation
Hino R, Sasaki A, Yoshida F and Toropov VV
Key Engineering Materials. vol. 340-341, 767-772.

DOI 10.4028/www.scientific.net/kem.340-341.767

06-06-2007

Reduction of stages in multi-stage metal forming process based on numerical optimization in conjunction with FE simulation
Hino R, Sasaki A, Yoshida F and Toropov VV
Key Engineering Materials vol. 340-341 I, 767-772.

DOI 10.4028/0-87849-433-2.767

01-01-2007

Generation of extended uniform Latin hypercube designs of experiments
Toropov VV, Bates SJ and Querin OM
Civil-Comp Proceedings. vol. 87
01-01-2007

2006

Analysis, optimization and probabilistic assessment of an airbag landing system for the ExoMars space mission
Slade R, Sharp P, Jones R and Toropov V
Collection of Technical Papers - 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. vol. 2, 1057-1065.
01-12-2006

Simultaneous uniform DOEs for model building and validation in a multidisciplinary optimization framework
Narayanan A, Toropov VV, Wood AS and Campean F
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. vol. 3, 1495-1506.
01-12-2006

Optimum blank design for sheet metal forming based on the interaction of high- and low-fidelity FE models
Hino R, Yoshida F and Toropov VV
Archive of Applied Mechanics vol. 75 (10-12), 679-691.

DOI 10.1007/s00419-006-0047-3

01-10-2006

Collaborative optimization framework based on the interaction of low -and high-fidelity models and the moving least squares method
Zadeh PM, Toropov VV and Wood AS
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. vol. 2, 1481-1494.

DOI 10.2514/6.2006-1711

01-01-2006

2005

A hybrid genetic algorithm for reinforced concrete flat slab buildings
Sahab MG, Ashour AF and Toropov VV
Computers and Structures vol. 83 (8-9), 551-559.

DOI 10.1016/j.compstruc.2004.10.013

01-03-2005

Cost optimisation of reinforced concrete flat slab buildings
Sahab MG, Ashour AF and Toropov VV
Engineering Structures vol. 27 (3), 313-322.

DOI 10.1016/j.engstruct.2004.10.002

01-02-2005

Application of Advanced Optimization Techniques to Parameter and Damage Identification Problems
Toropov V and Yoshida F
In Parameter Identification of Materials and Structures, Springer Nature 177-263.

DOI 10.1007/3-211-38134-1_6

01-01-2005

2004

Formulation of the optimal latin hypercube design of experiments using a permutation genetic algorithm
Bates SJ, Sienz J and Toropov VV
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. vol. 7, 5217-5223.
01-12-2004

Use of global approximations in the collaborative optimization framework
Zadeh PM, Toropov VV and Wood AS
Collection of Technical Papers - 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. vol. 6, 3934-3944.

DOI 10.2514/6.2004-4654

01-01-2004

2003

Empirical modelling of shear strength of RC deep beams by genetic programming
Ashour AF, Alvarez LF and Toropov VV
Computers and Structures vol. 81 (5), 331-338.

DOI 10.1016/S0045-7949(02)00437-6

01-03-2003

Inverse approach to identification of material parameters of cyclic elasto-plasticity for component layers of a bimetallic sheet
Yoshida F, Urabe M, Hino R and Toropov VV
International Journal of Plasticity vol. 19 (12 SPEC ISS.), 2149-2170.

DOI 10.1016/S0749-6419(03)00063-9

01-01-2003

2002

Identification of material parameters for component layers of clad sheet metal by elasto-plastic inverse approach
Yoshida F, Urabe M, Hino R and Toropov VV
Nippon Kikai Gakkai Ronbunshu, a Hen/Transactions of The Japan Society of Mechanical Engineers, Part A vol. 68 (5), 766-771.

DOI 10.1299/kikaia.68.766

01-01-2002

Multi-fidelity multidisciplinary design optimization based on collaborative optimization framework
Zadeh PM and Toropov VV
9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.
01-01-2002

Use of high- and low-fidelity models in approximations for design optimization
Markine VL and Toropov VV
9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.

DOI 10.2514/6.2002-5651

01-01-2002

Optimization of blank design for deep drawing process based on the interaction of high and low fidelity models
Hino R, Yoshida F and Toropov VV
9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.

DOI 10.2514/6.2002-5564

01-01-2002

2001

Bounded-but-unknown uncertainties in design optimization
van Keulen F, Damveld H, Elishakoff I and Toropov VV
19th AIAA Applied Aerodynamics Conference.

DOI 10.2514/6.2001-1242

01-12-2001

Approximation model using genetic programming methodology: Applications
Toropov VV, Alvarez LF, Hughes DC and Ashour AF
19th AIAA Applied Aerodynamics Conference.
01-12-2001

Design optimization of structural steelwork using a genetic algorithm, FEM and a system of design rules
Toropov VV and Mahfouz SY
Engineering Computations (Swansea, Wales) vol. 18 (3-4), 437-459.

DOI 10.1108/02644400110387118

01-01-2001

Approximation model using genetic programming methodology: Applications
Toropov VV, Alvarez LF, Hughes DC and Ashour AF
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. vol. 5, 3286-3296.

DOI 10.2514/6.2001-1628

01-01-2001

Bounded-but-unknown uncertainties in design optimization
van Keulen F, Damveld H, Elishakoff I and Toropov VV
19th AIAA Applied Aerodynamics Conference.

DOI 10.2514/6.2001-1242

01-01-2001

Determination of thermo-mechanical properties of SMA by inverse approach using isothermal stress-cycle tests
Yoshida F, Kyogoku H, Sakuma T and Toropov VV
PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II., 1867-1870.
01-01-2001

2000

Optimization of railway structure using multipoint approximations based on response surface fitting (MARS)
Markine VL, de Man A, Toropov VV and Esveld C
8th Symposium on Multidisciplinary Analysis and Optimization.
01-12-2000

Optimization of ballastless railway track using multipoint approximations: Issue of domain-dependent calculability
Markine VL, Toropov VV and Esveld C
8th Symposium on Multidisciplinary Analysis and Optimization.
01-12-2000

1999

Identification of parameters for air permeability of shotcrete tunnel lining using a genetic algorithm
Javadi AA, Farmani R, Toropov VV and Snee CPM
Computers and Geotechnics vol. 25 (1), 1-24.

DOI 10.1016/S0266-352X(99)00014-2

01-07-1999

The multi-point approximation method in a parallel computing environment
van Keulen F and Toropov VV
Zeitschrift Fur Angewandte Mathematik Und Mechanik vol. 79, S67-S70.
01-01-1999

1998

Optimization of workspace of a manipulator for a flight simulator using multipoint approximation method
Markine V, Meijers P and Toropov V
7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.

DOI 10.2514/6.1998-4955

22-08-1998

Approximation model building for design optimization using genetic programming methodology
Toropov V and Alvarez L
7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.

DOI 10.2514/6.1998-4769

22-08-1998

Improvements in the performance of a Genetic Algorithm - Application to steelwork optimum design
Mahfouz S, Toropov V and Westbrook R
7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.

DOI 10.2514/6.1998-4966

22-08-1998

Optimization of mechanisms using direct differentiation and a multipoint approximation method
Markine VL, Meijaard JP, Meijers P and Toropov VV
Engineering Optimization vol. 31 (2), 141-160.

DOI 10.1080/03052159808941368

01-01-1998

Identification of material parameters in constitutive models of cyclic plasticity from bending tests of sheet metals
Toropov VV, Urabe M, Okada T and Yoshida F
Nihon Kikai Gakkai Ronbunshu, a Hen/Transactions of The Japan Society of Mechanical Engineers, Part A vol. 64 (619), 737-757.

DOI 10.1299/kikaia.64.737

01-01-1998

Identification of material parameters in constitutive model for sheet metals from cyclic bending tests
Yoshida F, Urabe M and Toropov VV
International Journal of Mechanical Sciences vol. 40 (2-3), 237-249.

DOI 10.1016/s0020-7403(97)00052-0

01-01-1998

Optimization of a high-speed railway track using multipoint approximation method
Markine VL, Esveld C, Kok AWM, De Man AP and Toropov VV
7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization., 1328-1331.
01-01-1998

Approximation model building for design optimization using genetic programming methodology
Toropov VV and Alvarez LF
7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization., 490-498.

DOI 10.2514/6.1998-4769

01-01-1998

Optimization of workspace of a manipulator for a flight simulator using multipoint approximation method
Markine VL, Meijers P and Toropov VV
7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization., 1922-1932.

DOI 10.2514/6.1998-4955

01-01-1998

Improvements in the performance of a genetic algorithm: Application to steelwork optimum design
Mahfouz SY, Toropov VV and Westbrook RK
7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization., 2037-2045.

DOI 10.2514/6.1998-4966

01-01-1998

Application of a genetic algorithm and derivative-based techniques to identification of damage in steel structures
Ravaii H, Toropov VV and Mahfouz SY

DOI 10.1016/b978-008043319-6/50064-9

01-01-1998

Application of genetic programming and response surface methodology to optimization and inverse problems
Toropov VV and Alvarez LF

DOI 10.1016/b978-008043319-6/50062-5

01-01-1998

Identification of mechanical properties of component layers in a bimetallic sheet by mixed experimental-numerical approach
Yoshida F, Urabe M and Toropov VV

DOI 10.1016/b978-008043319-6/50029-7

01-01-1998

Identification of mechanical properties of component layers in a bimetallic sheet
Yoshida F, Urabe M and Toropov VV
EXPERIMENTAL MECHANICS, VOLS 1 AND 2., 927-931.
01-01-1998

Mixed numerical-experimental damage recognition in steel structures
Ravaii H, Toropov VV and Horoshenkov KV
EXPERIMENTAL MECHANICS, VOLS 1 AND 2., 77-82.
01-01-1998

1997

Shape optimization with adaptive mesh refinement: Target error selection strategies
Van Keulen F, Polynkine AA and Toropov VV
Engineering Optimization vol. 28 (1-2), 95-125.

DOI 10.1080/03052159708941128

01-01-1997

New developments in structural optimization using adaptive mesh refinement and multipoint approximations
Van Keulen F and Toropov VV
Engineering Optimization vol. 29 (1-4), 217-234.

DOI 10.1080/03052159708940994

01-01-1997

Material parameter identification for large deformation plasticity models
Toropov VV, Yoshida F and Van Der Giessen E
MATERIAL IDENTIFICATION USING MIXED NUMERICAL EXPERIMENTAL METHODS., 81-92.
01-01-1997

1996

Refinements in the multi-point approximation method to reduce the effects of noisy structural responses
Toropov V, va F, Markine V and d H
6th Symposium on Multidisciplinary Analysis and Optimization.

DOI 10.2514/6.1996-4087

22-08-1996

Recent Refinements in the Multi-Point Approximation Method in Conjunction With Adaptive Mesh Refinement
van Keulen F, Toropov V and Markine V
Volume 3: 22nd Design Automation Conference.

DOI 10.1115/96-detc/dac-1451

18-08-1996

Optimization of geometrically non-linear structures based on a multi-point approximation method and adaptivity
Polynkine AA, Van Keulen F and Toropov VV
Engineering Computations (Swansea, Wales) vol. 13 (2-4), 76-97.

DOI 10.1108/02644409610114477

01-01-1996

Multilevel optimization of the dynamic behaviour of a linear mechanical system with multipoint approximation
Markine VL, Meijers P, Meijaard JP and Toropov VV
Engineering Optimization vol. 25 (4), 295-307.

DOI 10.1080/03052159608941268

01-01-1996

The use of simplified numerical models as mid-range approximations
Toropov VV and Markine VL
6th Symposium on Multidisciplinary Analysis and Optimization., 952-958.
01-01-1996

Refinements in the multi-point approximation method to reduce the effects of noisy structural responses
Toropov V, Van Kculcn F, Markine V and De Boer H
6th Symposium on Multidisciplinary Analysis and Optimization., 941-951.

DOI 10.2514/6.1996-4087

01-01-1996

Optimization of the dynamic response of linear mechanical systems using a multipoint approximation technique
Markine VL, Meijers P, Meijaard JP and Toropov VV
IUTAM SYMPOSIUM ON OPTIMIZATION OF MECHANICAL SYSTEMS. vol. 43, 189-196.
01-01-1996

1995

Optimization of geometrically nonlinear thin-walled structures using the multipoint approximation method
Polynkin AA, van Keulen F and Toropov VV
Structural Optimization vol. 9 (2), 105-116.

DOI 10.1007/BF01758827

01-04-1995

1994

Optimization of Stirling engine performance based on multipoint approximation technique
Toropov VV and Carlsen H
American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. vol. 69-2, 531-536.
01-12-1994

Optimization of Stirling Engine Performance Based on Multipoint Approximation Technique
Toropov VV and Carlsen H
20th Design Automation Conference: Volume 2 — Robust Design Applications; Decomposition and Design Optimization; Optimization Tools and Applications., 531-536.

DOI 10.1115/detc1994-0166

11-09-1994

Oytimization of geometrically nonlinear shell structures using multi-meshing and adaptivity
van Keulen F, Toropov VV and Polynkine AA
5th Symposium on Multidisciplinary Analysis and Optimization, 1994., 995-1005.
01-01-1994

1993

Multiparameter structural optimization using FEM and multipoint explicit approximations
Toropov VV, Filatov AA and Polynkin AA
Structural Optimization vol. 6 (1), 7-14.

DOI 10.1007/BF01743169

01-03-1993

PARAMETER-IDENTIFICATION FOR NONLINEAR CONSTITUTIVE MODELS - FINITE-ELEMENT SIMULATION - OPTIMIZATION - NONTRIVIAL EXPERIMENTS
TOROPOV VV and VANDERGIESSEN E
OPTIMAL DESIGN WITH ADVANCED MATERIALS., 113-130.
01-01-1993

1992

MULTIPOINT APPROXIMATION METHOD IN OPTIMIZATION PROBLEMS WITH EXPENSIVE FUNCTION VALUES
TOROPOV VV
COMPUTATIONAL SYSTEMS ANALYSIS 1992., 207-212.
01-01-1992

1991

Simulation Approach to Structural Optimization Using Design Sensitivity Analysis
Malkov VP and Toropov VV
Lecture Notes in Engineering. vol. 63, 225-231.

DOI 10.1007/978-3-642-84397-6_22

01-01-1991

1989

Simulation approach to structural optimization
Toropov VV
Structural Optimization vol. 1 (1), 37-46.

DOI 10.1007/BF01743808

01-01-1989

Prof Vassili Toropov

Publications

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1989

Grants

Research Group

Research Staff

PhD Students