Dr Yong Pang
Postdoctoral Research Assistant
School of Engineering and Materials Science
Queen Mary University of London
Queen Mary University of London
Member of Dr Tao Liu's Research Group
| Funder: | Leverhulme Trust |
| Project: | Mechanics and biomimicking of marine mussel plaques-GRANT TRANSFER |
Publications
Publications of specific relevance to the Centre for Intelligent Transport2025
Anisotropy of 316 L stainless steel foil and its effect on the forming processXu C Huang S Li Z Cai Y Li H Pang Y
Materials Today Communications, Elsevier vol. 45
01-04-2025
2024
Ultra-soft cellular solids inspired by marine mussel plaques: scaling of the mechanical propertiesPang Y Busfield J Liu T
Proceedings of The Royal Society A, The Royal Society vol. 480 (2300), 20240257-20240257.
16-10-2024
Elastic–plastic strain conversion of a thin-plate miniaturized tensile test based on crosshead measurement via an analytical methodPang Y Huang S Li H Liu T Sun W
Theoretical and Applied Fracture Mechanics, Elsevier vol. 133
01-10-2024
Assessment of the Desiccation Cracking Characteristics of Clay Reinforced with Fibers Utilizing the Distributed Optical Fiber Sensing (DOFS) TechniqueChaduvula U Wong L Shannon B Pang Y Viswanadham BVS Kodikara J
Indian Geotechnical Journal, Springer Nature vol. 55 (6), 3746-3761.
28-09-2024
Anisotropic Plasticity Behavior of Rolled 316L Ultra-Thin Sheet and Its Application to Micro-Deep Drawing ModelingHu J Huang S Shang L Li H Pang Y
Journal of Materials Engineering and Performance, Springer Nature vol. 34 (13), 13053-13063.
23-09-2024
Unveiling mussel plaque core ductility: the role of pore distribution
and hierarchical structureLyu Y Tan M Pang Y Sun W Li S Liu T
08-07-2024
Quasi-static responses of marine mussel plaques detached from deformable wet substrates under directional tensionsPang Y Sun W Liu T
Proceedings of The Royal Society A, The Royal Society vol. 480 (2290)
01-05-2024
Virtual laboratory enabled constitutive modelling of dual phase steelsLiu W Li X Liu M Cui H Huang J Pang Y Ma J
International Journal of Plasticity, Elsevier vol. 175
01-04-2024
Anisotropic plasticity deformation during micro-deep drawing of 304 foils: An experimental and numerical investigationShang L Huang S Hu J Li H Pang Y
International Journal of Material Forming, Springer Nature vol. 17 (3)
15-03-2024
Determining hyperelastic properties of the constituents of the mussel
byssus systemLyu Y Pang Y Liu T Sun W
18-01-2024
Marine mussel plaque-inspired super soft, ductile and tough latticesPang Y Liu T
13-01-2024
Unveiling the deformability of mussel plaque core: the role of pore distribution and hierarchical structureLyu Y Tan M Pang Y Sun W Li S Liu T
Soft Matter, Royal Society of Chemistry (Rsc) vol. 20 (37), 7405-7419.
01-01-2024
Determining hyperelastic properties of the constituents of the mussel byssus systemLyu Y Pang Y Liu T Sun W
Soft Matter, Royal Society of Chemistry (Rsc) vol. 20 (11), 2442-2454.
01-01-2024
2023
Creep characterisation of Inconel 718 lattice metamaterials manufactured by laser powder bed fusionBhuwal AS Pang Y Maskery I Ashcroft I Sun W Liu T
Advanced Engineering Materials, Wiley
01-09-2023
Unravelling the effects of ratcheting and constraint on the cyclic behaviour of a martensitic steel under elevated temperatureRagab R Pang Y Liu T Neate N Li M Sun W
Mechanics of Materials, Elsevier, 104708-104708.
03-06-2023
Multi-scale modelling of evolving plastic anisotropy during Al-alloy sheet formingLiu W Huang J Pang Y Zhu K Li S Ma J
International Journal of Mechanical Sciences, Elsevier vol. 247
01-06-2023
Quasi-static responses of marine mussel plaques attached to deformable
wet substrates under directional tensionsPang Y Liu T
24-05-2023
Discovery of quasi-disordered truss metamaterials inspired by natural cellular materialsBhuwal AS Pang Y Ashcroft I Sun W Liu T
Journal of The Mechanics and Physics of Solids, Elsevier, 105294-105294.
08-04-2023
2022
Experimental investigation on microstructures and mechanical properties of PG4 flash-butt rail weldsPang Y Grilli N Su H Liu W Ma J Yu SF
Engineering Failure Analysis, Elsevier vol. 141
01-11-2022
Data-driven design of high ductile metamaterials under uniaxial tensionBhuwal AS Pang Y Liu T Ashcroft I Sun W
02-09-2022
Data-driven design of high ductile metamaterials under uniaxial tensionBhuwal AS Pang Y Liu T Ashcroft I Sun W
In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems, Taylor & Francis 115-116.
23-08-2022
Data-driven discovery of quasi-disordered mechanical metamaterials failed progressivelyBhuwal AS Pang Y Ashcroft I Sun W Liu T
In Arxiv
11-07-2022
2021
A multi-scale modelling framework for anisotropy prediction in aluminium alloy sheet and its application in the optimisation of the deep-drawing processLiu W Pang Y
International Journal of Advanced Manufacturing Technology, Springer vol. 114 (11-12), 3401-3417.
25-04-2021
2020
The structural integrity of flash-butt welded premium rail steel – Evaluation of strength, microstructure and defectsMicheletto A Cookson J Pang Y Chen B Mutton P
Proceedings of The Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit, Sage Publications vol. 235 (8), 1006-1012.
06-12-2020
A 3D phenomenological yield function with both in and out-of-plane mechanical anisotropy using full-field crystal plasticity spectral method for modelling sheet metal forming of strong textured aluminum alloyLiu W Chen BK Pang Y Najafzadeh A
International Journal of Solids and Structures, Elsevier vol. 193, 117-133.
01-06-2020
Enhanced laser speckle optical sensor for in situ strain sensing and structural health monitoring.Pang Y Chen BK Yu SF Lingamanaik SN
Optics Letters, Optica Publishing Group vol. 45 (8), 2331-2334.
09-04-2020
Development of a non-contact and non-destructive laser speckle imaging system for remote sensing of anisotropic deformation around fastener holesPang Y Chen BK Liu W Yu SF Lingamanaik SN
Ndt & E International, Elsevier vol. 111
01-04-2020
Measurement of deformation of the concrete sleepers under different support conditions using non-contact laser speckle imaging sensorPang Y Lingamanaik SN Chen BK Yu SF
Engineering Structures, Elsevier vol. 205
01-02-2020
2019
Numerical investigation of evolution of earing, anisotropic yield and plastic potentials in cold rolled FCC aluminium alloy based on the crystallographic texture measurementsLiu W Chen BK Pang Y
European Journal of Mechanics - a/Solids, Elsevier vol. 75, 41-55.
01-05-2019
An investigation of plastic behaviour in cold-rolled aluminium alloy AA2024-T3 using laser speckle imaging sensorPang Y Chen BK Liu W
The International Journal of Advanced Manufacturing Technology, Springer Nature vol. 103 (5-8), 2707-2724.
26-04-2019
2018
A new temperature-dependent anisotropic constitutive model for predicting deformation and spring-back in warm deep drawing of automotive AA5086-H111 aluminium alloy sheetLiu W Chen BK Pang Y
The International Journal of Advanced Manufacturing Technology, Springer Nature vol. 97 (9-12), 3407-3421.
25-05-2018
Research Group
News
No news items found.