Dr Wei Tan

Publications

Publications of specific relevance to the Centre for Intelligent Transport

2026

Co-design of structures via generalized evolution
Liu Y Xia B Li Z Ren H Du J Tan W
Computer Methods in Applied Mechanics and Engineering, Elsevier vol. 450 

DOI 10.1016/j.cma.2025.118584

01-03-2026

Damage self-sensing behavior of basalt fiber/polymer composites modified via electrophoretic deposition
Sun H Xiang D Qiu T Liu L Wang M Zhao C Wang B Li H et al.
Materials Letters, Elsevier vol. 405 

DOI 10.1016/j.matlet.2025.139725

01-02-2026

2025

SPDTM: A shapley-value based preference discovery and task matching to maximize satisfaction in mobile crowd sensing
Huang Z Sun Z Tan W Song HH Wang T Zhang S Liu A
Computer Networks, Elsevier vol. 271 

DOI 10.1016/j.comnet.2025.111602

01-10-2025

Computational Intelligence in Stochastic Reconstruction of Porous Microstructures for Image-Based Poro/Micro-Mechanical Modeling
Fu J Tan W Xiao D Zhuang X
Archives of Computational Methods in Engineering, Springer Nature, 1-69.  

DOI 10.1007/s11831-025-10313-9

26-08-2025

Mechano-electrochemical analysis of lithiation-induced deformation of composite electrodes using carbon fibre as current collector
Mao R Feng S Lei Z Bai R Tan W
Composites Science and Technology, Elsevier vol. 269 

DOI 10.1016/j.compscitech.2025.111251

01-08-2025

Fatigue Reliability Evaluation of Composite Structures with Low-Velocity Impact Damage
Xia J Liu H Cheng Z zhu Z Tan W Kang G
 

DOI 10.2139/ssrn.5344178

01-07-2025

Compressive failure mechanisms of fibre metal laminates with 2/1 and 3/2 configurations after low-velocity impact
Cheng Z-Q Xia J Liu H Zhu Z-W Tan W
Thin-Walled Structures, Elsevier vol. 211 

DOI 10.1016/j.tws.2025.113112

01-06-2025

Stochastic reconstruction of multiphase composite microstructures using statistics-encoded neural network for poro/micro-mechanical modelling
Fu J Tan W
Computer Methods in Applied Mechanics and Engineering, Elsevier vol. 441 

DOI 10.1016/j.cma.2025.117986

01-06-2025

Comparison of Three Matrix Damage Models for Predicting Mechanical Behaviors of Unidirectional Composites
Cheng Z-Q Zhong Y-Z Liu H Zhu Z-W Tan W Huo C
International Journal of Applied Mechanics, World Scientific Publishing vol. 17 (06) 

DOI 10.1142/s1758825125500462

01-06-2025

Multi-objective Bayesian optimisation of spinodoid cellular structures for crush energy absorption
Kansara H Khosroshahi SF Guo L Bessa MA Tan W
Computer Methods in Applied Mechanics and Engineering, Elsevier vol. 440 

DOI 10.1016/j.cma.2025.117890

QMRO

01-05-2025

A novel multistable honeycomb structure with tailored variable-length functions
Wang R Niu B Tan W
Engineering Structures, Elsevier vol. 324 

DOI 10.1016/j.engstruct.2024.119354

01-02-2025

Effect of heating rate on thermal behaviour of plasticised hard polyurethane-urea
Restasari A Kaur A Naderizadeh S Qi X Akutagawa K Spontak RJ Busfield JJC Tan W
Journal of Physics Conference Series, Iop Publishing vol. 2945 (1), 012047-012047.  

DOI 10.1088/1742-6596/2945/1/012047

QMRO

01-02-2025

Stochastic reconstruction of multiphase composite microstructures using statistics-encoded neural network for poro/micro-mechanical modelling
Fu J Tan W
 
13-01-2025

2024

Multi-objective Bayesian Optimisation of Spinodoid Cellular Structures for Crush Energy Absorption
Kansara H Khosroshahi SF Guo L Bessa MA Tan W
In Arxiv 

DOI 10.48550/arxiv.2411.14508

21-11-2024

Advanced computational modelling of composite materials
Cheng Z-Q Liu H Tan W
Engineering Fracture Mechanics, Elsevier vol. 305 

DOI 10.1016/j.engfracmech.2024.110120

QMRO

01-07-2024

Characterisation of Polyurethane-urea as Leading-Edge Erosion Resistant Materials of Wind Turbine Blades
Restasari A Naderizadeh S Kaur A Akutagawa K Busfield J Tan W
Iop Conference Series Earth and Environmental Science, Iop Publishing vol. 1344 (1), 012015-012015.  

DOI 10.1088/1755-1315/1344/1/012015

QMRO

01-05-2024

Failure analysis of glass fiber and basalt fiber reinforced polymer composites under an extreme environment with high‐temperature, high‐pressure and H2S/CO2 exposure
Sun H Xiang D Liu Z Liu L Harkin‐Jones E Wang M Tan W Luo P et al.
Polymer Composites, Wiley vol. 45 (11), 10124-10136.  

DOI 10.1002/pc.28462

18-04-2024

2023

Inverse design and additive manufacturing of shape-morphing structures based on functionally graded composites
Kansara H Liu M He Y Tan W
Journal of The Mechanics and Physics of Solids, Elsevier vol. 180 

DOI 10.1016/j.jmps.2023.105382

QMRO

01-11-2023

Enhanced composite thermal conductivity by percolated networks of in-situ confined-grown carbon nanotubes
Zhang X Tan W Carey T Wen B He D Arbab A Groombridge A Smail F et al.
Nano Research, Tsinghua University Press vol. 16 (11), 12821-12829.  

DOI 10.1007/s12274-023-6209-6

01-11-2023

Temperature-dependent cutting physics in orthogonal cutting of carbon fibre reinforced thermoplastic (CFRTP) composite
Ge J Tan W Ahmad S Falzon BG Catalanotti G Higgins C Jin Y Sun D
Composites Part a: Applied Science and Manufacturing, Elsevier vol. 176 

DOI 10.1016/j.compositesa.2023.107820

QMRO

05-10-2023

Electrical, mechanical and damage self-sensing properties of basalt fiber reinforced polymer composites modified by electrophoretic deposition
Sun H Xiang D Zhang J Tan W Harkin-Jones E Wang J Wang M Wang B et al.
Progress in Natural Science: Materials International, Elsevier vol. 33 (5), 593-600.  

DOI 10.1016/j.pnsc.2023.11.003

01-10-2023

Porosity-dependent stability analysis of bio-inspired cellular nanocomposite shells
Sobhani Aragh B Tan W Borzabadi Farahani E Al-Greer M Hughes D
International Journal of Mechanical Sciences, Elsevier 

DOI 10.1016/j.ijmecsci.2023.108763

QMRO

23-09-2023

Inverse design and additive manufacturing of shape-morphing structures based on functionally graded composites
Kansara H Liu M He Y Tan W
In Arxiv 

DOI 10.48550/arxiv.2307.05805

11-07-2023

Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements
Xiang D Shui T Qiao H Tan W Harkin-Jones E Zhang J Ji P Wang P et al.
Composite Interfaces, Taylor & Francis vol. 30 (12), 1387-1409.  

DOI 10.1080/09276440.2023.2220500

02-06-2023

Hygroscopic phase field fracture modelling of composite materials
Au-Yeung K Quintanas-Corominas A Martínez-Pañeda E Tan W
Engineering With Computers, Springer 

DOI 10.1007/s00366-023-01820-z

QMRO

24-04-2023

Hygroscopic phase field fracture modelling of composite materials
Au-Yeung K Quintanas-Corominas A Martínez-Pañeda E Tan W
In Arxiv 

DOI 10.48550/arxiv.2304.07291

06-04-2023

High Temperature Tensile and Fatigue Crack Propagation Properties of GH3536 Alloy Fabricated by Additive Manufacturing
Xiao L Peng Z Cai Z Zhao X Zhong Q Yu H Wang S Tan W
Xiyou Jinshu Cailiao Yu Gongcheng Rare Metal Materials and Engineering vol. 52 (3), 1015-1021.  
01-03-2023

Modelling fatigue behaviours and lifetimes of novel GLARE laminates under random loading spectrum
Cheng ZQ Tan W Xiong JJ He EM Xiong TH Wang YP
Composite Structures, Elsevier vol. 311 

DOI 10.1016/j.compstruct.2023.116799

QMRO

21-02-2023

Modelling Fatigue Behaviours and Lifetimes of Novel GLARE Laminates under Random Loading Spectrum
Cheng Z-Q Tan W Xiong J-J Hed E-M Xiong T-H Wang Y-P
In Arxiv 

DOI 10.48550/arxiv.2302.10620

21-02-2023

Inverse design of shape-morphing structures based on functionally graded composites
Kansara H Liu M He Y Tan W
Iccm International Conferences on Composite Materials. 
01-01-2023

Data-driven topology optimisation for energy-absorbing structures
Khosroshahi SF Kansara H Kumar S Bessa MA Tan W
Iccm International Conferences on Composite Materials. 
01-01-2023

Mechanical Properties of Carbon Nanotube Composite Film Under High-Velocity Impact
Wang W Tan W Toropov V
Iccm International Conferences on Composite Materials. 
01-01-2023

Multiscale modelling of Li-ion battery and battery-protective materials
Ulloa EFG Busfield J Pugno N Tan W
Iccm International Conferences on Composite Materials. 
01-01-2023

Hygroscopic Phase Field Failure Modelling of Composite Materials
Tan W Au-Yeung K Martínez-Pañeda E Corominas AQ
Iccm International Conferences on Composite Materials. 
01-01-2023

2022

Understanding Chip Formation in Orthogonal Cutting of Aeronautical Thermoplastic CF/PEKK Composites Based on Finite Element Method
Ge J Tan W Catalanotti G Falzon BG McClelland J Higgins C Jin Y Sun D
In Advances in Manufacturing Technology Xxxv, Ios Press 

DOI 10.3233/atde220584

08-11-2022

Modular multistable metamaterials with reprogrammable mechanical properties
Mao JJ Wang S Tan W Liu M
Engineering Structures, Elsevier vol. 272 

DOI 10.1016/j.engstruct.2022.114976

QMRO

21-09-2022

Modelling Pre-fatigue, Low-velocity Impact and Post-impact Fatigue Behaviours ofQ Composite Helicopter Tail Structures under Multipoint Coordinated Loading Spectrum
Cheng Z-Q Tan W Xiong J-J
Thin-Walled Structures, Elsevier 

DOI 10.1016/j.tws.2022.109349

QMRO

10-05-2022

Modelling Pre-fatigue, Low-velocity Impact and Fatigue behaviours of Composite Helicopter Tail Structures under Multipoint Coordinated Loading Spectrum
Cheng Z-Q Tan W Xiong J-J
 
05-05-2022

Influence of high-temperature, high-pressure, and acidic conditions on the structure and properties of high-performance organic fibers
Wang X Li P Xiang D Wang B Zhang Z Zhang J Zhao C Li H et al.
Materials Testing, De Gruyter vol. 64 (5), 623-635.  

DOI 10.1515/mt-2021-2099

01-05-2022

Phase field fracture predictions of microscopic bridging behaviour of composite materials
Tan W Martínez-Pañeda E
Composite Structures, Elsevier vol. 286 

DOI 10.1016/j.compstruct.2022.115242

QMRO

05-02-2022

Phase field fracture predictions of microscopic bridging behaviour of composite materials
Tan W Martínez-Pañeda E
In Arxiv 

DOI 10.48550/arxiv.2201.03066

QMRO

09-01-2022

激光成形GH3536合金的显微组织与力学性能研究
Liu Liming 刘 Peng Zhenwu 彭 Xiao Lairong 肖 Wang Huan 王 Zhao Xiaojun 赵 Cai Zhenyang 蔡 Tan Wei 谭
Laser & Optoelectronics Progress, Shanghai Institute of Optics and Fine Mechanics vol. 59 (19) 

DOI 10.3788/lop202259.1916002

01-01-2022

2021

Fatigue Crack Growth and Life Prediction of 7075-T62 Aluminium-alloy Thin-sheets with Low-velocity Impact Damage under Block Spectrum Loading
Cheng Z-Q Xiong J-J Tan W
International Journal of Fatigue, Elsevier, 106618-106618.  

DOI 10.1016/j.ijfatigue.2021.106618

QMRO

21-10-2021

The Nail Penetration Behaviour of Carbon Nanotube Composite Electrodes for Energy Storage
Koliolios E Mills DG Busfield JJC Tan W
Frontiers in Materials, Frontiers Media vol. 8, 741541-741541.  

DOI 10.3389/fmats.2021.741541

QMRO

21-10-2021

High-Performance Flexible Strain Sensors Based on Biaxially Stretched Conductive Polymer Composites with Carbon Nanotubes Immobilized on Reduced Graphene Oxide
Zhang X Xiang D Wu Y Harkin-Jones E Shen J Ye Y Tan W Wang J et al.
Composites Part a: Applied Science and Manufacturing, Elsevier, 106665-106665.  

DOI 10.1016/j.compositesa.2021.106665

QMRO

04-10-2021

A crystal plasticity phenomenological model to capture the non-linear shear response of carbon fibre reinforced composites
Tan W Falzon BG
International Journal of Lightweight Materials and Manufacture vol. 4 (1), 99-109.  

DOI 10.1016/j.ijlmm.2020.06.004

QMRO

01-07-2021

The mechanical and electrochemical properties of polyaniline-coated carbon nanotube mat
Tan W Stallard JC Jo C De Volder MFL Fleck NA
In Arxiv 

DOI 10.48550/arxiv.2106.09097

16-06-2021

Data-driven modelling of scalable spinodoid structures for energy absorption
Kansara H Koh G Varghese M Luk JZX Gomez EF Kumar S Zhang H Martínez-Pañeda E et al.
Ukacm Conference Proceeding 2021 
01-05-2021

Catalyst-Mediated Enhancement of Carbon Nanotube Textiles by Laser Irradiation: Nanoparticle Sweating and Bundle Alignment
Gspann TS Kaniyoor A Tan W Kloza PA Bulmer JS Mizen J Divitini G Terrones J et al.
Catalysts, Mdpi Ag vol. 11 (3), 368-368.  

DOI 10.3390/catal11030368

QMRO

11-03-2021

Phase field predictions of microscopic fracture and R-curve behaviour of fibre-reinforced composites
Tan W Martínez-Pañeda E
Composites Science and Technology, Elsevier Bv, 108539-108539.  

DOI 10.1016/j.compscitech.2020.108539

QMRO

31-01-2021

激光增材制造GH3536合金的低周疲劳行为
Xiao Lairong 肖 Tan Wei 谭 Liu Liming 刘 Tu Xiaoxuan 涂 Peng Zhenwu 彭 Wang Huan 王 Zhao Xiaojun 赵
Chinese Journal of Lasers, Shanghai Institute of Optics and Fine Mechanics vol. 48 (22) 

DOI 10.3788/cjl202148.2202009

01-01-2021

2020

Phase field predictions of microscopic fracture and R-curve behaviour of fibre-reinforced composites
Tan W Martínez-Pañeda E
In Arxiv 

DOI 10.48550/arxiv.2011.00779

02-11-2020

A physically-based constitutive model for the shear-dominated response and strain rate effect of carbon fibre reinforced composites
Tan W Liu B
Composites Part B: Engineering, Elsevier 

DOI 10.1016/j.compositesb.2020.108032

QMRO

08-04-2020

2019

Experimental study on shear properties of concrete pile-clay interface considering surface roughness of structure
Wang Y Li Y Tan W Tang M Du W
Zhongnan Daxue Xuebao Ziran Kexue Ban Journal of Central South University Science and Technology vol. 50 (10), 2502-2509.  

DOI 10.11817/j.issn.1672-7207.2019.10.018

26-10-2019

The mechanical and electrical properties of direct-spun carbon nanotube mat-epoxy composites
Tan W Stallard JC Smail FR Boies AM Fleck NA
Carbon vol. 150, 489-504.  

DOI 10.1016/j.carbon.2019.04.118

QMRO

01-09-2019

The mechanical and electrical properties of direct-spun carbon nanotube mat-epoxy composites
Tan W Stallard JC Smail FR Boies AM Fleck NA
In Arxiv 

DOI 10.48550/arxiv.1905.08422

20-05-2019

Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: An experimental and numerical study
Liu H Falzon BG Li S Tan W Liu J Chai H Blackman BRK Dear JP
Composite Structures, Elsevier vol. 213, 108-117.  

DOI 10.1016/j.compstruct.2019.01.070

QMRO

01-04-2019

Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact
Li X Ma D Liu H Tan W Gong X Zhang C Li Y
Composite Structures, Elsevier vol. 207, 727-739.  

DOI 10.1016/j.compstruct.2018.09.093

01-01-2019

2018

Cohesive zone modeling of the autoclave pressure effect on the delamination behavior of composite laminates
Chang T Zhan L Tan W Wu X
Journal of Reinforced Plastics and Composites, Sage Publications vol. 37 (24), 1468-1480.  

DOI 10.1177/0731684418799948

14-09-2018

An experimental method to determine the intralaminar fracture toughness of high-strength carbon-fibre reinforced composite aerostructures
Liu H Falzon BG Catalanotti G Tan W
The Aeronautical Journal, Cambridge University Press (Cup) vol. 122 (1255), 1352-1370.  

DOI 10.1017/aer.2018.78

QMRO

30-07-2018

High-fidelity characterization on anisotropic thermal conductivity of carbon nanotube sheets and on their effects of thermal enhancement of nanocomposites
Zhang X Tan W Smail F De Volder M Fleck N Boies A
Nanotechnology, Iop Publishing vol. 29 (36) 

DOI 10.1088/1361-6528/aacd7b

04-07-2018

The mechanical and electrical properties of direct-spun carbon nanotube mats
Stallard JC Tan W Smail FR Gspann TS Boies AM Fleck NA
Extreme Mechanics Letters vol. 21, 65-75.  

DOI 10.1016/j.eml.2018.03.003

QMRO

01-05-2018

The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
Tan W Naya F Yang L Chang T Falzon BG Zhan L Molina-Aldareguía JM González C et al.
Composites Part B: Engineering vol. 138, 206-221.  

DOI 10.1016/j.compositesb.2017.11.043

QMRO

01-04-2018

Experimental and numerical studies on the impact response of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates
Liu H Falzon BG Tan W
Composites Part B Engineering, Elsevier vol. 136, 101-118.  

DOI 10.1016/j.compositesb.2017.10.016

QMRO

01-03-2018

A multiscale methodology quantifying the sintering temperature‐dependent mechanical properties of oxide matrix composites
Jiang R Yang L Liu H Tan W Sun X Cheng H Mao W
Journal of The American Ceramic Society, Wiley vol. 101 (7), 3168-3180.  

DOI 10.1111/jace.15473

09-02-2018

Predicting the Compression-After-Impact (CAI) strength of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates
Liu H Falzon BG Tan W
Composites Part a Applied Science and Manufacturing, Elsevier vol. 105, 189-202.  

DOI 10.1016/j.compositesa.2017.11.021

QMRO

01-02-2018

2017

Comment on “A tensorial based progressive damage model for fibre reinforced polymers”
Falzon BG Liu H Tan W
Composite Structures, Elsevier vol. 176, 877-882.  

DOI 10.1016/j.compstruct.2017.06.011

QMRO

01-09-2017

Effect of autoclave pressure on interfacial properties at micro- and macro- level in polymer-matrix composite laminates
Chang T Zhan L Tan W Li S
Fibers and Polymers, Springer Nature vol. 18 (8), 1614-1622.  

DOI 10.1007/s12221-017-7384-4

01-08-2017

Optimization of curing process for polymer-matrix composites based on orthogonal experimental method
Chang T Zhan L Tan W Li S
Fibers and Polymers, Springer Nature vol. 18 (1), 148-154.  

DOI 10.1007/s12221-017-6606-0

01-01-2017

2016

Virtual Testing of Composite Structures: Progress and Challenges in Predicting Damage, Residual Strength and Crashworthiness
Falzon BG Tan W
In The Structural Integrity of Carbon Fiber Composites, Springer Nature 699-743.  

DOI 10.1007/978-3-319-46120-5_24

29-11-2016

Modelling the crush behaviour of thermoplastic composites
Tan W Falzon BG
Composites Science and Technology, Elsevier vol. 134, 57-71.  

DOI 10.1016/j.compscitech.2016.07.015

QMRO

06-10-2016

The role of material characterisation in the crush modelling of thermoplastic composite structures
Tan W Falzon BG Price M Liu H
Composite Structures, Elsevier vol. 153, 914-927.  

DOI 10.1016/j.compstruct.2016.07.011

QMRO

01-10-2016

Void content and interfacial properties of composite laminates under different autoclave cure pressure
Chang T Zhan L Tan W Li S
Composite Interfaces, Taylor & Francis vol. 24 (5), 529-540.  

DOI 10.1080/09276440.2016.1237113

28-09-2016

Predicting Impact Damage, Residual Strength and Crashworthiness of Composite Structures
Falzon B Tan W
Sae International Journal of Materials and Manufacturing, Sae International vol. 9 (3), 718-728.  

DOI 10.4271/2016-01-0497

05-04-2016

Modelling the nonlinear behaviour and fracture process of AS4/PEKK thermoplastic composite under shear loading
Tan W Falzon BG
Composites Science and Technology, Elsevier vol. 126, 60-77.  

DOI 10.1016/j.compscitech.2016.02.008

QMRO

01-04-2016

Effect of autoclave cure cycles on the interfacial properties of composite laminates
Zhan L Tan W Chang T Ding X
Eccm 2016 Proceeding of the 17th European Conference on Composite Materials. 
01-01-2016

An experimental method to determine the longitudinal intralaminar fracture toughness of high tensile strength fibre-reinforced unidirectional composites
Liu H Falzon BG Tan W
Eccm 2016 Proceeding of the 17th European Conference on Composite Materials. 
01-01-2016

2015

Predicting low velocity impact damage and Compression-After-Impact (CAI) behaviour of composite laminates
Tan W Falzon BG Chiu LNS Price M
Composites Part a Applied Science and Manufacturing, Elsevier vol. 71, 212-226.  

DOI 10.1016/j.compositesa.2015.01.025

01-04-2015

Numerical prediction of the low-velocity impact damage and compression after impact strength of composite laminates
Tan W Falzon BG Chiu LNS Price M
IOP Conference Series Materials Science and Engineering. vol. 74 (1) 

DOI 10.1088/1757-899x/74/1/012015

17-02-2015

Electromagnetic characteristics of large gap magnetic driving axial flow blood pump
Tan Z Tan J Liu Y Tan W
Zhongnan Daxue Xuebao Ziran Kexue Ban Journal of Central South University Science and Technology vol. 46 (1), 99-106.  

DOI 10.11817/j.issn.1672-7207.2015.01.014

01-01-2015

2014

Predicting the crushing behaviour of composite material using high-fidelity finite element modelling
Tan W Falzon BG Price M
International Journal of Crashworthiness, Taylor & Francis vol. 20 (1), 60-77.  

DOI 10.1080/13588265.2014.972122

07-11-2014

2011

Study on Control Parameters in the Acceleration of Axial Flow Blood Pump
Xie X Tan JP Liu HT Liu YL Tan W Tan Z
Applied Mechanics and Materials. vol. 128-129, 1031-1034.  

DOI 10.4028/www.scientific.net/amm.128-129.1031

01-10-2011

Study on Acceleration Control Algorithm of Blood Pump Driven by Large Gap Magnetic Force
Tan JP Liu YL Liu HT Tan W Tan Z
Advanced Materials Research. vol. 317-319, 1193-1196.  

DOI 10.4028/www.scientific.net/amr.317-319.1193

01-08-2011

Study on Acceleration Control Algorithm of Blood Pump Driven by Large Gap Magnetic Force
Tan J-P Liu Y-L Liu H-T Tan W Tan Z
EQUIPMENT MANUFACTURING TECHNOLOGY AND AUTOMATION, PTS 1-3. vol. 317-319, 1193-1196.  

DOI 10.4028/minv.scientific.net/AMR.317-319.1193

01-01-2011

The mechanical and electrochemical properties of polyaniline-coated carbon nanotube mat
Tan W Stallard J De Volder M Jo C Fleck N
Journal of Energy Storage, Elsevier 

DOI 10.1016/j.est.2021.102757

QMRO

Progressive Damage Modelling and Fatigue Life Prediction of Plain-weave Composite Laminates with Low-velocity Impact Damage
Cheng Z Tan W Xiong J
Composite Structures, Elsevier 

DOI 10.1016/j.compstruct.2021.114262

QMRO

Temperature-dependent cutting physics in orthogonal cutting of carbon fibre reinforced thermoplastic (CFRTP) composite
Ge J Tan W Ahmad S Falzon BG Catalanotti G Higgins C Jin Y Sun D
In Research Square 

DOI 10.21203/rs.3.rs-3384765/v1

Grants

Grants of specific relevance to the Centre for Intelligent Transport

From Lab to Field: Developing Resilient Coating Materials for Rain Erosion Protection in Wind Turbine Applications
Wei Tan
£59,991 Henry Royce Institute
01-10-2025 - 28-02-2026

LSIMPACT: Life-like Resilient Materials for Mitigating Liquid-Solid Impact Damage
Wei Tan
£1,270,404 EPSRC - EU Scheme
01-08-2024 - 31-07-2029

---

Decoding the Material Degradation Mechanisms Under High-velocity Liquid-solid Impact Loadings
Wei Tan
£70,000 Royal Society
31-03-2023 - 30-03-2025

CELLCOMP: Data-driven Mechanistic Modelling of Scalable Cellular Composites for Crash Energy Absorption
Wei Tan
£392,388 EPSRC Engineering and Physical Sciences Research Council
01-01-2022 - 10-04-2025

Research Group

Research Staff

• Dr Hongye Guo
• Dr Ziyu Guo
• Dr Devender Kumar
• Dr Yang Liu

PhD Students

• Carlos Beauregard Leon
  Understanding The Failure Mechanisms of Wind Turbine Blade C
• Nathan Boachie
  Numerical Simulations of Asymmetric Bubble Dynamics
• Emilio Gomez Ulloa
  Developing Crashworthy and Thermally Conductive Graphene Related Composite Materials For Electrical Car Battery Assembly
• Hirak Kansara
  Inverse Design of Architected Materials Via Analytical and Data-Driven Approaches
• Sarah Pedroni
  Developing Next Generation Sustainable Tyres Utilising 3D Microstructural Simulations of Filler Reinforcement
• Afni Restasari
  Self-Healing Polyurethane Composites as Coating Materials For Wind Turbine Blades
• Haoming Sun
  Developing New Self-Sensing and Self-Healing Composite Materials For Offshore Infrastructures
• Luke Webb
  Modelling The High-Velocity Liquid-Solid Impact Damage Mechanisms of Composite Materials in Leading Edge Erosion.
• Jie Yang
  Sustainelectrode: 3D Sustainable Composite Electrodes For Next-Generation Energy Storage Devices
• Yuancheng Yang
  Multiphysics Phase-Field Modelling of Fracture in Composite Materials

News